Thursday, March 27, 2014

Project V (Part 2)




Last weekend I've started the tedious but necessary task of disassembling my V Gundam kits in order to prepare the parts for gluing.  Despite the hurdles I've had along the way, I succeeded, but not before trying one last experiment.


Yep, I've finally broke out the Weapons for Mobile-Suit add-on parts.  Now we really get to see what's inside.


Molded on 2 runners are parts for beam rifles, cannons, bazookas, a gatling gun, a pistol and a head variant for the 1/144 V2 Gundam.  The set also throws in a plethora of stickers that I'm unlikely to use in most sittings, and building instructions that suggest what goes where.


Also forgot the 2 sets of polycap hands included in the set; 2 pairs of open palms, clenched fists and trigger fingers, along with side-skirt armor to mount weapons.


On the back of each runner, you'll notice holes in the fists and open palms.  I'll go see if I can fill them with putty . . . eventually.


Before taking it apart, I tried out the shoulder cannons meant for the Zoloat.  Both are fixed to the holes in Zoloat's backpack; a simple construct.  Trying out the hands, however, resulted in one hand nearly popping out its socket (the curved handle of the rifle was forcing it out).  For the Javelin, I've chosen a beam bazooka to replace its rifle.

So that's pretty much it for now.  Join me next time for Part 3 of Project V.  Until then . . .


So true, sooo true.

Monday, March 24, 2014

Review: 1/144 NG Javelin


General/Technical Data

Series: No Grade 1/144
Title: RGM-122 Javelin
Release Date: 05/1993
Suggested Price: ¥ 500 ($7)
No. of Parts: 51 + Polycaps + Foil Stickers
Plastic Colors: Turquoise, White, Translucent Pink
Gimmicks: Beam Rifle, Shot Lancers (2), Beam Sabers (2), Beam Shield, Display Base

Intro

Another entry from the Victory Gundam line, I built the Javelin (which I always call the Valiant for some reason) alongside the Zoloat.  Designed in the same vein, it's as dated in model form as it is on the show.

Head

The head consists of 2 halves, with the visor protruding from the back.  Stickers are included for the visor and face.

Torso


The photo above should describe the construction of the chest better than what was written for the Zoloat's review.  All stickers pertaining to the torso go on the chest.


At the center of this photo is the backpack, composed of 2 large parts.  Surrounding it are a pair of "Shot Lancers"--basically rocket-powered lances--that hoist onto the backpack.  Watching closely, you'll notice the Lancers have polycaps made of the same polystyrene plastic as the rest of the kit, instead of the soft ABS plastic that's always used.  This would present a problem if and when these joints wear themselves out.  You'll also notice that, having built the Lancers in haste, I've left out the folding handle that the Javelin can grab on to.


The lower torso is basically the same as the Zoloat's, except the side skirt armor's a lot smaller by comparison.

Arms


As with the rest of the kit, the arms are similar to the Zoloat's in terms of construction.  Once fixed onto their respective ball joints in the torso, The shoulder armor, with a tiny thruster piece on the side (first pic), overlaps the exposed shoulder.  The left arm includes a compartment for the beam shield.

Legs


Having about 3 points of articulation, the legs have thrusters molded onto the knee armor and a tiny hole on the side for attaching the included rifle.  My main concern is that the foot is composed of 2 parts that fit loosely at the heel, which is hallow on both sides.

Weapons & Accessories


Besides the Shot Lancers, Javelin's arsenal includes a standard beam rifle, which has holes on the side and a peg to attach to the legs.  It's also pretty small compared to the weaponry of other kits in the same scale.  Next is the beam shield affixed to the left arm with a generator piece, and a pair of beam sabers; one straight, one curved.  As with Zoloat, translucent parts for a display stand with a backdrop card (which has MS data on the back) is also included.

Conclusion

Thrusters, thrusters everythere!  With so many verniers sticking out of the body, Javelin--though looking pretty goofy even for a battle robot--should have no problem in the propulsion department.  In real life, this is basically Zoloat molded in turquoise, and with a better-fitting shield.

Overall Rating: 3 Verniers Out of 5.

Wednesday, February 26, 2014

Review: 1/144 NG Zoloat



General/Technical Data

Series: No Grade 1/144
Title: ZM-S06S Zoloat
Release Date: 05/1993
Suggested Price: ¥500 ($7)
No. of Parts: 50 + Polycaps + Foil Stickers
Plastic Colors: Red, Yellow, Transluscent Purple
Gimmicks: Beam Rifle, Beam Sabers (2), Beam Shield, Display Base

Intro

I'm taking my sweet time, but I'm making good on my promise to churn out a few blogs on a regular basis.  And my latest attempt to return to Gunpla building has begun with yet another blast from the past.  Inspired by Mobile Suit Victory Gundam, the Zoloat offers a unique, albeit faster, method to building by molding the runners in the same shape and simply pressing them together, assembling several parts at once.  Other than that and Bandai's attempt at an inner frame composed of polycaps, it's your run-of-the-mill, generic 1/144 scale model.

Head

Basically 2 halves molded in red.  Stickers are provided for the forehead, eyes and cheek vents.

Torso


Composed of 7 parts, including a large polycap with joints placed inside the chest, the torso also sports a backpack with 2 thrusters.  4 stickers are available for the chest.


Much like the 1/144 NG G Gundam, 2 more polycaps hold all the skirt armor together, giving articulation to each individual piece (except the front and back skirt).  One sticker is available for this section.

Arms


Each made up of 9 parts--including polycap hands of which you can't tell the back from the palm--both arms can rotate 360 degrees at the elbow and bend at a 180-degree angle.  What's more . . .


The left shoulder armor has a built-in sidearm while the right one can hold up the beam shield (though not very well; more on this one later).

Legs


Each made up of 7 parts, the legs can move at about 45 degrees at the knees and ankle.  The oddity here are two tiny pieces, each with 2 thrusters, that slide onto the back of the legs.  Apart from not being hollowed out, the thrusters just stick out too much when viewed from the back.

Weapons & Accessories


The beam rifle comes in a single piece and needs painting.  Fixed onto a runner of brittle clear-purple plastic are a straight and curved saber, the shield and a display base able to support both the model and an included postcard from the battlefield (back).  If the card was a little wider or set up sideways, perhaps it would've worked.  As for the shield (right), it goes through a peg under the shoulder armor and held in place (albeit, not very well) with a separate piece.

Conclusion

I reiterate, the Zoloat is your run-of-the-mill, generic Gunpla kit with sub-par articulation and a few interesting gimmicks, but nothing special.  You gotta like how they threw in a free display stand, though.



Overall Rating: 3 Out of 5.

Monday, February 10, 2014

Project V (Part 1)

If I learned anything from these past few days is that if something's important to you, you make time for it.  With that said, I really want to see this Gunpla project through to the end, though it'll still take time considering all the other hobbies I've fallen behind on (I'm still reading The Girl Who Played with Fire after a year!).  I'm already looking up how I can spruce up my 2 Victory Gundam mechs.  But for now, let's prepare for when they're eventually painted.




I started with the Zoloat, my favorite of the two.  I took my own sponge (cuz using the one from the kitchen sink would be gross) along with some dishwasher soap and gave the runners a good rubdown.  Then I rinsed out the parts with water and laid them out to dry.




I've tried to do the same for some plastic cards and signs I've saved up so that I can customize the Gunpla with the bits and pieces.  But the only thing I have that can strip the ink and printing is a bottle of nail polish remover.  Up till now I've avoided using it cuz the acetone it contains can melt plastic, but I'm already working with limited resources.  So I tried it and so far the results are mixed.




Remember when I mentioned the V Gundam models have their own unique method of assembly?  Course you don't.  Notice how these 2 runners share the same shape and their parts seem symmetric to each other?  Actually one big runner, I've split it in 2, intending to press both halves together via the instructions.  But before going that far . . .




I cut out the soft plastic polycap with ball joints connecting both the head and arms and stick it in one half of the torso . . .




And then pressed both runners together, assembling the head, torso, shins at the same time.  Took some work to separate 'em from the runner, though.




I moved on to construct the rest of the torso, and the backpack (not pictured).




Along with the shoulder armor . . .




And the arms . . .




And the legs . . .







And we're done.  The last 2 pics show the Zoloat with its arsenal and perched on its display base.  Behind it is that scenic trading card with a base of its own.  Not the best concept Bandai ever dreamt up, but at least the model itself gets its very own base.




 And now I move on the Javelin, following all the procedures I've set up for the Zoloat.




Here's a shot of Javelin's backpack, which holsters a pair of missile-like weapons called Shot Lancers.  I almost forgot to add a handle for Javelin to grab onto the Lancers for added acceleration.  Skip the next few steps . . .






And we're done.




Though they seem to hold up better than most of my other NG's, I've still got my nitpicks, which will be covered in my reviews.  Also look out for my next entry for this project.  Until next time, I'm saving up for a can of Purple Power.

Wednesday, February 5, 2014

Project V (Intro)


Project V: A name fitting for my first Gunpla project for this new year.




On top of the other kits I've started but never finished, I've taken out these two on a binge brought on by repeat views of Gundam Build Fighters.  I guess now's a good a time as any to formally introduce the 1/144th scale ZM-S06S Zoloat (Left) and RGM-122 Javelin (Right) from the Mobile Suit Victory Gundam animated series.  Both models were released in 1993 and each sell for 500 Japanese yen ($3.94 US).  They are Numbers 5 and 6 in this Gunpla set, respectively.

Let's check out the Zoloat first:




Straight out of the box, most of the parts are separated by color.  Under the bags is a foldout instruction manual and a card with a space scene on the front and mech info on the back.  The card will come into play later.




Now that the bags are open, we have a better view of the Zoloat's parts.  On the lower right we see both clear-purple parts for beam weaponry and an included display base, and also polycaps that connect the limbs, similar in design to the 1/144 NG G Gundam.




Though constructed the same way as the Zoloat, the Javelin appears to have a few more pieces; understandable since the mobile suit itself has a bigger armament.




Almost forgot to mention that this optional weapons set will also be used in this project.  Same year of release, same price and it's Number 14 in the V series.  Here's a preview of the parts and stickers that we'll see when the time comes:




That's all for now.  Next time I'll get around to test-building these new Gunpla.  Until then, catch the new Gundam series Gundam Build Fighters on GundamInfo's channel on YouTube.